Secure Remote Console Server

 Secure Remote Console Server Front and Rear view

Remote Secure Console Server

Features / Benefits

Description

* Remote Secure Console Server via SSL


* Supports Unlimited Remote Sites


* Transports Async Serial Communications over a 10/100 Ethernet Network


* Async Data Rates - 1200bps to 115.2Kbps for Simultaneous Four-Port Operation


* Serial Interface - Four RS-232 Ports on RJ-45 Connectors


* LAN Interface - 10/100Base-T on RJ-45


* Supports Twisted Pair Crossover Detection and Auto-Correction (HP Auto- MDIX)


* Secure SSL Encryption


* Straight-through CAT-5 cabling for Easy Async Connection


* Log Off, Location I.D. feature and supports DHCP


* Firmware Upgrades via 10/100 LAN Port


* Extends Management Capabilities to Remote Devices


* AC or DC Power Supply Options


* 1U Rackmount Enclosure

The Async2IP is a secure remote console access product that connects up to four async
remote console serial ports, across a 10/100 LAN to the serial ports of a terminal at a
central network control site. The Async2IP converts the full duplex asynchronous serial
data stream to an encrypted TCP/IP packet stream.


The Async2IP units are initially configured via secure SSL HTML “web page” interfaces.
This process allows the user to configure the LAN IP Address and the RS-232 Port speeds.
After configuration all command and data functions are accomplished inside the terminal
interface at the central site using HyperTerminal or Putty. The central site Async2IP unit(s)
function as Master device. The Master Device can connect one session at a time to an
unlimited amount of Remote Site units. Two or more Async2IP units are required to connect
the serial devices over the LAN.


The asynchronous data is sent on byte boundaries, and when asynchronous CTS flowcontrol
is honored the interconnected asynchronous ports may operate at different speeds.
The asynchronous byte format supported is 8 data bits, 1 stop bit, and no parity. Therefore
the asynchronous byte frame is 10 bits in length.


The Async2IP RS-232 serial ports are presented as a DCE device using an 8-pin RJ-45
connector for each of its asynchronous ports. The RJ-45 ports are pinned to be compatible
with popular Routers and Switches.


Using the Async2IP is similar to using legacy dialup modems. From within the terminal
window on the PC (which is connected to a Master Async2IP unit) an IP address and port
number is entered while in command mode. Upon hitting ENTER this IP address is used
to establish a secure TCP session with the desired Remote unit. When this TCP session
is successfully made the two Async2IP units are now in Data Mode working just like a
legacy modem would.


Once in Data mode all keystrokes entered in the terminal window are delivered to the
attached remote user device at the other end of the LAN link. Conversely all display data
generated by the remote user device is delivered to the terminal window in near Real
Time.


The Async2IP unit’s system firmware upgrades are accomplished via the 10/100 LAN port.
This is also accomplished via encryption and password protected. After completion of
the firmware upgrade the Async2IP will reset itself and resume normal communications.
No system software is required to be installed on the user’s network or workstations for
operation of the Async2IP.


The Async2IP is housed in a sturdy 19 inch 1U high chassis and has a 90-120 VAC power
supply. Additional power supplies of 90-240VAC or 36 to 72 Volts DC are also available.
The Async2IP has a 3-year warranty and a 24 hour turnaround on warranty repairs.

  Secure remote console server network diagram
 

SPECIFICATIONS

Application Secure Remote Console Server, 4-Port RS-232 Serial port management via Ethernet with a secure SSL Web Browser
Interface RS-232 on RJ-45’s, Async, 8, N, 1(10 bit)
LAN: 10/100 Base-T, RJ-45 with DHCP Support
Capacity Up to Four Serial Async Ports converted to one 10/100 Base-T LAN Port
Data Rates Serial Data:1200 bps to 115.2 Kbps for simultaneous 4-Port operation
LAN: 10/100Mbps
Data Format Data transparent at all data rates
Serial Buffer 2048 bytes
Configuration Encryption Via SSL Encrypted Web Browser Interface, supports SSL v3
User Configuration Stored in Flash memory
Firmware Upgrades Upgraded via 10/100 LAN Port
Indicators System: Green or Yellow
Peer: Green or Yellow
Port 1: Green or Yellow
Port 2: Green or Yellow
Link: Green
Activity: Yellow
Included with each unit: 1)  Installation Guide
Power Source AC Power Option: 90-120VAC 50Hz or 90-240VAC, 50/60Hz, external 110/220 select, IEC Power Inlet
DC Power Option: DC Voltage, Input Range of -36 to -72vdc,
Environmental
Lead Free: RoHS Compliant
Operating Temp: 32º to 122º F (0º to 50º C)
Relative Humidity: 5 to 95%Non-Condensing
Altitude: 0 to 10,000 feet
Dimensions Length ....... 3.22inches (8.18 cm)
Width ........ 19.00 inches (48.26 cm)
Height ....... 1.75 inches (4.44 cm)
Weight 2 pounds (0.97 Kg)
Warranty Three Years, Return To Factory
ORDERING INFORMATION

PT# 183000
Model: Async2IP_WEB
Desc: 4-Port Remote Secure Console Server
Power Supply Options

PT# 180062

Model: AC 110VAC
PT# 180070
Model: AC 110/220VAC

PT# 180074
Model: DC 36-72VDC

PRODUCTS

Network Delay Simulators IP Traffic Generators Data Broadcast Units Digital Sharing Devices Interface Converters Modem Emulators Code Operated Switches Serial Network Adapters TDM Multiplexers

 

New Product Short Form & Capabilities Catalog wan latency emulator catalog-download

logo GSA Contract Holder

23rd

Anniversary

logo

Contact Us

Site Map | Legal Information
Copyright 2017 East Coast Datacom Inc
All Rights Reserved