SME-530, RS-530 MODEM ELIMINATOR

rs530 sync modem eliminator

SME-530

RS-530 SYNC MODEM ELIMINATOR FOR ITU - V.11

Features / Benefits

Description

* Sync Modem Eliminator
* Interface - ITU V.11 RS-530 DB-25 Female Connectors
 
* Data Rates - Synchronous to 2.048Mbps - Option for T2 (6.312Mbps)
 
* FPGA design allows very low jitter at high end speeds
 
* Options for RTS/CTS delay, DSR, DTR on a per port basis
 
* Timing - Internal or accepts external timing from DTE for test purposes
 
* Status LED's for each port allows ease of connection and trouble shooting
 
* 110/220VAC switch selectable
 
* Sturdy Metal Enclosure

The SME-530 modem eliminator allows two RS-530 DTE devices to communicate within proximity of each other. The SME-530 transmits data bi-directionally at data rates up to 2.048Mbps between DTE devices. All clocking and signal crossover are provided within the SME-530. The unit is equiped with two DB-25 female connectors.

The SME-530 is an excellent choice for interconnecting your LAN or mainframe equipment. Substantial cost savings are derived by eliminating the need for 56/64Kbps CSU's and T1 CSU's.

Installation is fast and simple by setting the internal switches for Clocking, Carrier Operation and RTS to CTS delay. The SME-530 has status LED's for each attached DTE device which allows the user to visually confirm the presence of control signals.

The SME-530 utilizes state of the art digital CMOS technology to provide a feature filled product at a very affordable price. Our Field Programmable Gate Array (FPGA) design has allowed us to offer this product with a wide selection of user Baud Rates. This design approach has also reduced the amount of clock jitter for high speed 2.048Mbps transmissions.

The SME-530 is housed in a sturdy metal enclosure and operates on 110/220VAC. Typical MTBF figures are in excess of 100,000 hours of operation.

The SME-530 has a three year warranty and a 24 hour turnaround on warranty repairs.

  rs530 modem eliminator network diagram
 

SPECIFICATIONS

Application Modem Eliminator for interconnection of two RS-530 DTE (Terminal) devices located within proximity of each other
Capacity Two (2) RS-530 DTE's
Interface RS-530 using V.11 electrical specification
Data Rates Up to 2.048Mbps; Option for T2 (6.312Mbit)
Channel Interface Two Female DB-25-P Connectors
Surge Protection Main power supply
Power Source 100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC Power Inlet, (2) 5mm Fuses
Environmental Operating Temperature....32º to 122º F (0º to 50º C)
Relative Humidity.............5 to 95%
Non-Condensing
Altitude............................0 to 10,000 feet
Dimensions Height ....... 1.75 inches (4.44 cm)

Width ........ 7.90 inches (20.07 cm)

Length ....... 9.00 inches (22.86 cm)

Weight 2 pounds (0.914Kg
Warranty Three Years, Return to Factory
Ordering Information: Model: SME-530
Description: Synchronous RS-530 Modem Eliminator
Included with each unit: 1) Operations Manual

2) U.S.A. Grounded Power Cord, Part #713015

3) Optional Power Cords

..... A) United Kingdom, Part #713016

..... B) Continental Europe, Part #713017

..... C) Other: Specify Country on Purchase Order

Optional Accessories: 1) Spare Data Center Fuses

..... A) 160ma Fuse, Qty (2) Part #714000

..... B) 80ma Fuse, Qty (2) Part #714001

PRODUCTS

Network Delay Simulators IP Traffic Generators Data Broadcast Units Digital Sharing Devices Interface Converters Modem Emulators Code Operated Switches Serial Network Adapters TDM Multiplexers

 

New Product Short Form & Capabilities Catalog wan latency emulator catalog-download

logo GSA Contract Holder

25th

Anniversary

logo

Contact Us

Site Map | Legal Information
Copyright 2019 East Coast Datacom Inc
All Rights Reserved