TTL-530, TTL to RS530 Interface Converter

ttl to rs530 interface converter product proto

TTL-530

TTL to RS-530 INTERFACE CONVERTER

Features / Benefits

Description

* TTL to RS-530 Interface Converter
* Interface - TTL and RS-530, DB-25 Female and BNC Connectors
 
* Data Rates - Up to 10Mbps
 
* AC Powered, 110/220VAC
 
* 1U High Rackmount Chassis
 
* Passes Data, Clock and Ground
 
* Bi-Directional Transmission
 
* Two Converters on One Card
 
* Rackmount Aluminum Enclosure

The TTL-530 is a TTL to RS530 interface converter that is designed to provide signal level conversion between TTL Clock and Data signal levels (as used in telemetry equipment) and RS-530 (V.11) DTE (Terminal) equipment.

The TTL-530 accepts TTL signal levels into the Input Ports via BNC connectors. The TTL signal levels are converted to ITU V.11 (Balanced) voltage levels and are then transmitted on the Output Port. The Output Port is a DB-25-P (Female) connector with RS-530 pin assignments. The TTL-530 is capable of data and clock transmission at rates up to 10Mbps. A second set of BNC connectors are provided for remote DTE loopback testing providing bi-directional transmission.

The TTL-530 has two separate TTL to RS-530 converters designed in the same chassis. The chassis is made of sturdy aluminum and is rackmountable at 1U (1.75 inches) high. The device is shipped with rackmount ears for standard 19 inch cabinets.

The TTL-530 operates on 115/230VAC switch selectable power. A voltage selection switch is located on the rear of the device. An IEC power connector is provided for power cord connection. A standard three pronge (grounded) continental US power cord is provided with the device.

The TTL-530 has a three year, return to factory warranty.

 

SPECIFICATIONS

Application TTL to RS-530 Interface converter and Signal Level Conversion
Capacity Two (2) TTL independent Inputs and Two (2) RS-530 Output Ports
Interface TTL (50 to 75ohm) and RS-530 (ITU V.11)
Data Format Data transparent at all data rates
Data Rates Up to 10mbps
Switches Signal to Chassis GND option
Clock and Data Inverted Straps
TTL Physical Interface Female BNC Connectors
RS-530 Physical Interface Female DB-25 Connectors
Power Source 90-120 to 200-240VAC @10%, 50/60Hz, 0.32/0.16A, external 110/220 volt select switch, IEC Power Inlet, (2) 5mm Fuses
Environmental Operating Temperature . .32º to 122º F (0º to 50º C)

Relative Humidity.. . . . . . .5 to 95% Non-Condensing

Altitude. . . . . . . . . . . . . ... .0 to 10,000 feet

Dimensions Height ....... 1.75 inches (4.44 cm)

Width ........ 17.00 inches (43.18 cm)

Length ....... 9.00 inches (22.86 cm)

Weight 4.5 pounds (2.1 Kg)
Warranty Three Years, Return To Factory
Ordering Information

PT# 122000

Model: TTL-530
Description: TTL to RS-530 Converter

Included with each unit: 1) Installation Guide
2) Rackmount Kit

PRODUCTS

Network Delay Simulators IP Traffic Generators Data Broadcast Units Digital Sharing Devices Interface Converters Modem Emulators Code Operated Switches Serial Network Adapters TDM Multiplexers

 

New Product Short Form & Capabilities Catalog wan latency emulator catalog-download

25th

Anniversary

logo

Contact Us

Site Map | Legal Information
Copyright 2019 East Coast Datacom Inc
All Rights Reserved