UDC-SA, KIV SYNC TO ASYNC SERIAL ADAPTER

The UDC-SA, KIV SERIAL ADAPTER is an interface adapter designed to transmit one-way serial messages received from a synchronous RS-530 DCE, operating at 1200 bps, to an RS-232 asynchronous DTE at 2400 baud. The adapter is able to determine the beginning and end of a message by searching for selected patterns that frame a message.

press to get the UDC-SA KIV Adapter: HTML Spec Sheet PDF Spec Sheet
PDF Operations Manual
 

Sync2IP, ASYNC or SYNC TO IP CONVERTER

The Sync2IP or sync to ip converter is a device that transports serial communications over a TCP/IP network. It converts a full duplex Sync or Async serial data stream to a TCP/IP packet stream.

 

UDC-RA, 64k ASYNC TO SYNC RATE ADAPTER

The UDC-RA Rate Adapter allows low speed async or sync RS-232 data terminal equipment(DTE) to transmit over a higher speed 16k, 64k or 128k sync data communication quipment(DCE) link. Additionally, the unit supports matched data rates for basic Async to Sync conversion such as 19.2k async over sync 19.2k. The UDC-RA devices are used in pairs, one at each end of the communications link or in multiples as when used in a multi-point or broadcast link. The UDC-RA will support bi-directional or simplex data transmissions.

 

 

RA-64/128K, 64k ASYNC TO SYNC RATE ADAPTER

The RA-64/128K Rate Adapter allows low speed async RS-232 DTE equipment to transmit over a high speed 64K or 128k sync communications link. The RA-64/128k will support bi-directional or simplex data transmissions.

 

 

ASC-232 / V.11, ASYNC TO V.11 SYNC CONVERTER

This converter allows Asynchronous RS-232 DTE equipment to communicate over Synchronous RS-530 or RS-422/449 DCE equipment. The product was developed especially for government and secure encrypted Modems utilized by a Gretacoder that has an existing RS-422/V.11 electrical interface. This converter allows Asynchronous RS-232 DTE equipment to communicate over Synchronous RS-530 or RS-422/449 DCE equipment. The product was developed especially for government and secure encrypted Modems utilized by a Gretacoder that has an existing RS-422/V.11 electrical interface.

press to get the ASC-232 / V.11: HTML Spec Sheet PDF Spec Sheet
PDF Operations Manual
 

ASC-422, ASYNC TO RS-422 SYNC ADAPTER

This async to sync converter allows Asynchronous RS-232 DTE equipment to communicate over Synchronous RS-530 or RS-422/449 DCE equipment. The product was developed especially for government and secure encrypted Modems utilized by a Gretacoder that has an existing RS-422/V.11 electrical interface.

 

ASC-232, RS-232 ASYNC to SYNC CONVERTER

The ASC-232 Async to Sync Converter is designed to allow async terminal equipment to transmit over higher speed sync modems. The device is autobaud at data rates up to 38.4Kbps and is line powered.

 

SV11-AV24, SYNC TO ASYNC ADAPTER

The SV11-AV24 allows simplex 9600bps synchronous 8-bit data to be transmitted to asynchronous 19.2kbps data terminal equipment (DTE). The synchronous data interfaces supported are RS-422/449, V.35 and RS-530. The asynchronous data interface is RS-232.

 

 

press to get the SV11-AV24: HTML Spec Sheet PDF Spec Sheet
PDF Operations Manual
 

RA-64k/128k_V35-AC, ASYNC TO SYNC ADAPTER

The RA-64/128K Rate Adapter allows low speed async or sync RS-232 DTE equipment to transmit over a high speed 64K or 128k V.35 sync communications link. The unit supports forced control signals and RTS in-band to either DCD, CTS or DSR. The RA-64/128k will support bi-directional or simplex data transmissions.

press to get the RA-64/128K_V35-AC: HTML Spec Sheet PDF Spec Sheet
PDF Operations Manual
 

PRODUCTS

Network Delay Simulators IP Traffic Generators Data Broadcast Units Digital Sharing Devices Interface Converters Modem Emulators Code Operated Switches Serial Network Adapters TDM Multiplexers

 

New Product Short Form & Capabilities Catalog wan latency emulator catalog-download

logo GSA Contract Holder

23rd

Anniversary

logo

Contact Us

Site Map | Legal Information
Copyright 2017 East Coast Datacom Inc
All Rights Reserved