
ASYNC TO SYNC CONVERTER
RS-232 to RS-449 or RS-530
Features / Benefits
- Interface - RS-232, DB-25 Male (To DTE) and RS-449/RS-530 Female DB-25 (ToDCE)
- Data Rates - Synchronous to 38.4bps and supports
3/4 baud rates - Synchronous data rates are automatically adjusted
- Ac Mains Powered, 110 / 220 VAC Switch Selectable
- Switch selectable - 8 to 11 bits
- CCITT V.14 and V.22 compliant
- Supports full and half duplex operation
- Compact and Easy To Install
Description
The ASC-232 / V.11 Async to Sync Converter is designed to allow RS-232
async terminal equipment to transmit over higher speed V.11 compliant sync
modems. The ASC-232 / V.11 devices are used in pairs, one at each end of the
communication link or in multiples as when used in a multi-drop communication
link.
The ASC-232 / V.11 supports async data of 8, 9, 10 and 11 bits, including the
start and stop bit. Standard data rates from 1200 to 38.4bps and 3/4 rates of
900 to 28.8bps are supported for synchronous transmission. The ASC-232 /
V.11 automatically adjusts the sync data rate to match the DTE’s output rate, no
data rate strapping is required.
Stop bit reduction is provided when the async data rate is faster than the sync
data rate, ensuring reliable data communications.
The ASC-232 / V.11 has convenient front panel LED’s for control signal status.
AC mains power supply allows the data interface signals to drive longer distances
than interface powered devices.
The ASC-232 / V.11 is housed in a sturdy metal enclosure and will provide in
excess of 100,000 hours of reliable service. The unit is AC mains powered and
is switch selectable for 110 / 220 VAC.
The ASC-232 / V.11 has a three year warranty and a 24 hour turnaround on
warranty repairs.
SPECIFICATIONS |
|
Application | RS-232 async terminal to sync RS-422/RS-530 modem Conversion, full or half duplex |
Capacity | One sync RS-422/530 modem One async RS-232 terminal |
Serial Data Interface | RS-232 to DTE V.11 or RS-422, RS-530 to DCE |
Data Format | Data transparent at all data rates Conforms to CCITT V.14 and V.22, (Async to Sync conversion)) |
Data Rates | 1200 to 38.4bps 900 to 28.8bps |
Switches | Provided for async data set-up, stop bit reduction and signal to frame ground |
Physical Interface | Female DB-25 Connector to Modem Female DB-25 Connector for Terminal |
Power Source | AC mains powered 110 / 220 VAC switch seletable +/-10%, 50 / 60 Hz, IEC Power Inlet |
Environmental | Operating Temperature....32° to 122° F (0° to 50° C) Relative Humidity.............5 to 95% Non-Condensing Altitude.............................0 to 10,000 feet |
Dimensions | Height ....... 1.75 inches (4.44 cm) Width ........ 7.90 inches (20.07 cm) Length ....... 9.00 inches (22.86 cm) |
Weight | 2 pound (0.914Kg) |
Warranty | Three Years, Return To Factory |
Regulatory Approvals | UL 60950-1:2003, CAN/CSA-C22.2 No. 60950-1:2003FCC Part 15, EN55022:2006, ICES-003, Class A |
Ordering Information | Part #: 163000 Model: ASC-232 / V.11 Description: RS-232 Async to V.11 sync converter, AC Power |
Included with each unit: | 1) Installation Guide |