CE-232 RS-232 Cable Extender

rs232 cable extender

CE-232 CABLE EXTENDER

RS-232 SIGNAL EXTENDER

Features / Benefits

Description

* Interface - RS-232 and Inverted RS-423
 
* Data Rates - Sync/Async to 64Kbps
 
* DCE or DTE Selectable Ports
 
* Utilizes Female DB-25 and Pluggable 8-Pin Terminal Blocks
 
* Passes All Appropriate Control Signals
 
* Bi-Directional Data Transmission
 
* Transparent to Data
 
* Compact and Easy To Install
 
* 110/220VAC Switch Selectable

The CE-232 is a point-to-point device that allows the extension of eight control signals far greater in distance than that of conventional RS-232. The CE-232 is terminated to a DCE type device (on the RS-232 port) at one end of the communication link. A cable, fully shielded, is then terminated to the CE-232 and attached to another CE-232 at the corresponding end. The CE-232 transmits an inverted RS-423 signal. This allows all control signals to be transmitted, bi-directionally for distances that may equal up to 5000 ft.

Located on the front panel of the CE-232 are eight (8) LED indicators. The PWR indicator, TXD, RXD, RTS, CTS, DCD, TXD and RXC which represent the RS-232 control signals. The control signal indicators act as a break out box in that installation and trouble shooting are a straight forward process. When properly terminated and with the presence of DATA, all control signals are active between the two connected CE-232s and the LEDs illuminated.

The CE-232 is housed in a sturdy metal enclosure and will provide in excess of 100,000 hours of reliable service.

The CE-232 has a three year warranty and a 24 hour turnaround on warranty repairs.

  rs232 cable extender
 

SPECIFICATIONS

Application RS-232 signal extension between DCE and DTE devices
Capacity One RS-232 DTE and One RS-232
DCE Sync/Async device
Interface RS-232 and Inverted RS-423
Data Format Data transparent at all data rates
Data Rates Up to 64Kbps
Switches None (All connections are external)
RS-232 Physical Interface Female DB-25 Connectors
RS-423 Physical Interface Pluggable 8-Pin Terminal Blocks
Power Source 100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC Power Inlet, (2) 5mm Fuses
Environmental Operating Temperature . .32º to 122º F (0º to 50º C)

Relative Humidity . . . .. . .5 to 95% Non-Condensing

Altitude . . . . . . . . . . . ... . .0 to 10,000 feet

Dimensions Height ....... 1.75 inches (4.44 cm)

Width ........ 7.90 inches (20.07 cm)

Length ....... 9.00 inches (22.86 cm)

Weight 2 pounds (0.914Kg)
Warranty Three Years, Return To Factory
 Approvals  CE Approved
Ordering Information Model: CE-232
Description: RS-232 Signal Extender
Included with each unit: 1) Operations Manual

2) One (1) Screw Plug Block

PRODUCTS

Network Delay Simulators IP Traffic Generators Data Broadcast Units Digital Sharing Devices Interface Converters Modem Emulators Code Operated Switches Serial Network Adapters TDM Multiplexers

 

New Product Short Form & Capabilities Catalog wan latency emulator catalog-download

logo GSA Contract Holder

25th

Anniversary

logo

Contact Us

Site Map | Legal Information
Copyright 2019 East Coast Datacom Inc
All Rights Reserved