Features / Benefits
- Sync Modem Eliminator
- Interface - ITU V.11 RS-530 DB-25 Female Connectors
- Data Rates - Synchronous to 2.048Mbps - Option for T2 (6.312Mbps)
- FPGA design allows very low jitter at high end speeds
- Options for RTS/CTS delay, DSR, DTR on a per port basis
- Timing - Internal or accepts external timing from DTE for test purposes
- Status LED's for each port allows ease of connection and trouble shooting
- 110/220VAC switch selectable
- Sturdy Metal Enclosure>
Description
The SME-530 modem eliminator allows two RS-530 DTE devices to communicate within proximity of each other. The SME-530 transmits data bi-directionally at data rates up to 2.048Mbps between DTE devices. All clocking and signal crossover are provided within the SME-530. The unit is equiped with two DB-25 female connectors.
The SME-530 is an excellent choice for interconnecting your LAN or mainframe equipment. Substantial cost savings are derived by eliminating the need for 56/64Kbps CSU's and T1 CSU's.
Installation is fast and simple by setting the internal switches for Clocking, Carrier Operation and RTS to CTS delay. The SME-530 has status LED's for each attached DTE device which allows the user to visually confirm the presence of control signals.
The SME-530 utilizes state of the art digital CMOS technology to provide a feature filled product at a very affordable price. Our Field Programmable Gate Array (FPGA) design has allowed us to offer this product with a wide selection of user Baud Rates. This design approach has also reduced the amount of clock jitter for high speed 2.048Mbps transmissions.
The SME-530 is housed in a sturdy metal enclosure and operates on 110/220VAC. Typical MTBF figures are in excess of 100,000 hours of operation.
The SME-530 has a three year warranty and a 24 hour turnaround on warranty repairs.
SPECIFICATIONS |
|
Application | Modem Eliminator for interconnection of two RS-530 DTE (Terminal) devices located within proximity of each other |
Capacity | Two (2) RS-530 DTE's |
Interface | RS-530 using V.11 electrical specification |
Data Rates | Up to 2.048Mbps; Option for T2 (6.312Mbit) |
Channel Interface | Two Female DB-25-P Connectors |
Surge Protection | Main power supply |
Power Source | 100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC Power Inlet, (2) 5mm Fuses |
Environmental | Operating Temperature....32º to 122º F (0º to 50º C) Relative Humidity.............5 to 95% Non-Condensing Altitude............................0 to 10,000 feet |
Dimensions | Height ....... 1.75 inches (4.44 cm)
Width ........ 7.90 inches (20.07 cm) Length ....... 9.00 inches (22.86 cm) |
Weight | 2 pounds (0.914Kg |
Warranty | Three Years, Return to Factory |
Ordering Information: | Model: SME-530 Description: Synchronous RS-530 Modem Eliminator |
Included with each unit: | 1) Operations Manual
2) U.S.A. Grounded Power Cord, Part #713015 3) Optional Power Cords ..... A) United Kingdom, Part #713016 ..... B) Continental Europe, Part #713017 ..... C) Other: Specify Country on Purchase Order |
Optional Accessories: | 1) Spare Data Center Fuses
..... A) 160ma Fuse, Qty (2) Part #714000 ..... B) 80ma Fuse, Qty (2) Part #714001 |